AK98Aluminium Dent Pulling
When trying to remove dents in aluminium, the most difficult part of the job is getting a fixing on the surface of the panel prior to pulling. At Wielander and Schill UK Ltd, we have designed the AK 98 stud fixer. This tool is designed specifically for this job, and can be used on all types of aluminium panels.

Now it is possible on some vehicles, to repair damaged wings, quarter panels or door skins instead of replacing them. This saves time and is very profitable for the body shop.

The AK98 stud fixer is used to weld studs onto the panel into the dent or scrape that has to be repaired. The power of the transformer can be adjusted to work on panels made by different manufacturers. For example, an Audi panel will require a different setting than that used for repairing a Range Rover.

Once the studs have been fitted, you can pull the dent by using the Maxi-lift lever, together with the claw or stud-clamping piece.

Whilst you are pulling the dent out, warm the panel and then use a planishing hammer to work the panel back to shape.

• Dent pulling made easy with the AK98

• No need to replace the body panel

• Use the Maxilift to pull the dent out of the panel.

For more information and to register for updates by email, please click here.

Main Links:
Aluminium Links: